Abarth 2014 500, Owner'S Manual

Page: 141 / 211

REPLACING AN
EXTERIOR BULB
For the type of bulb and power rating,
see paragraph "Replacing a bulb".
FRONT LIGHT CLUSTERS
The front light clusters contain side
lights, dipped headlights, main beam
headlights and direction indicator bulbs.
Access to the direction
indicator bulbs
Operating from the engine
compartment remove the rubber cap A
fig. 100.
Access to the dipped
headlight bulbs
Remove the rubber cap B fig. 100.
Access to the side
light/daytime running
light (DRL) and main
beam headlight bulbs
Completely steer the wheels and open
guard door C fig. 101 (on the wheel
arch at the level of the lights) then
remove the rubber cap D fig. 101.
DIRECTION INDICATORS
Front
To change the bulb, proceed as follows:
❒
remove the protective rubber cap
mentioned above;
❒
turn the bulb holder A fig. 102
anticlockwise and remove it;
❒
remove the pressure-fitted bulb and
replace it;
❒
refit the bulb holder A by turning it
clockwise and locking it correctly;
❒
refit the rubber cap.
100
AB0A0088
101
AB0A0089
102
AB0A0090
137