Abarth 2014 500, Owner'S Manual

Page: 71 / 211

Selecting an option from the main
menu without a submenu:
❒
briefly press the MENU button to
select the main menu option to be
set;
❒
press buttons + or – (with single
presses) to select the new setting;
❒
briefly press the MENU button to
store the new setting and to go back
to the same main menu option
selected previously.
Selecting an option from the main
menu with a submenu:
❒
briefly press the MENU button to
display the first submenu option;
❒
press buttons + or – (with single
presses) to scroll through all the
submenu options;
❒
briefly press the MENU button to
select the displayed submenu option
and to open the relevant setup menu;
❒
press buttons + or – (with single
presses) to select the new setting for
this submenu option;
❒
briefly press the MENU button to
store the new setting and to go back
to the same submenu option
selected previously.
MENU ITEMS
Menu
This option allows you to access the
Setup menu.
Press the + or – button to select the
various Menu items.
Hold down the MENU button to
return to the standard screen.
Lighting (Car interior
lighting adjustment)
On some versions, the instrument panel
is provided with a light sensor capable
of detecting environmental light
conditions and adjusting the brightness
of the panel accordingly.
The brightness of the instrument panel
may therefore change while travelling
following an event causing a switch
from "day" to "night" conditions (or vice
versa) in the passenger compartment
(e.g. in a tunnel, on avenues in
shadows, under flyovers, etc.). The
lighting can be adjusted in night mode
only with dipped headlights on. If the
headlights are not on, it can be
adjusted in day mode.
This function is available, with the
dipped headlights on and in night-time
conditions, to adjust the brightness
of the instrument panel, control
buttons, radio and automatic climate
control displays.
On some versions, during the daytime
and with dipped headlights on, the
instrument panel, control buttons, radio
and automatic climate control displays
are set to maximum brightness.
To adjust the brightness, proceed as
follows:
❒
press the MENU button briefly to
make the display flash the previously
stored level;
❒
press button + or – to adjust the
brightness level;
❒
press the MENU button briefly to
return to the menu screen or hold the
button down to return to the
standard screen without storing.
67