ABACO PCIE-5565RC Series Hardware Reference Manual Download Page 36

Page: 36 / 72

Publication No. 500-9300875565-000 Rev. C.0

Programming 35

Table 3-4 PCI Status Register

PCI Status: Offset $06

Bit

Description

Read Write

Value after

PCI Reset

2:0

Reserved

Yes

Interrupt Status.

Set by the Reflective Memory when the

function would normally assert an interrupt pin,

regardless of interrupt disable bit state.

Yes

New Capabilities Functions Support.

Hardwired to a one (1). The Reflective Memory

implements a capabilities list.

Yes

66 MHz Capable.

If set to one (1), this device supports 66 MHz

PCI clock environment.

Yes

User Definable Functions.

If set to one (1), this device supports user

definable functions.

Read-only from the PCI bus.

Yes

Fast Back-to-Back Capable.

A one (1) indicates an adapter can accept fast

back-to-back transactions. (

NOTE

: Hardwired

to zero (0).)

Yes

Master Data Parity Error Detected.

Set by the Reflective Memory acting as a

master when it detects a data parity error, if

parity error response bit is set.

Yes

Yes/Clr 0

10:9

DEVSEL# Timing.

Hardwired to Binary (10) Devsel# timing is slow

Yes

Target Abort.

When set to one (1), indicates the Reflective

Memory has signaled a Target Abort.

Writing a one (1) clears this bit to zero (0).

Yes

Yes/Clr 0

Received Target Abort.

When set to one (1), indicates the Reflective

Memory has received a Target Abort signal.

Writing a one (1) clears this bit to zero (0).

Yes

Yes/Clr 0

Received Master Abort.

When set to one (1), indicates the Reflective

Memory has received a Master Abort signal.

Writing a one (1) clears this bit to zero (0).

Yes

Yes/Clr 0

Signal System Error.

When set to one (1), indicates the Reflective

Memory has reported a system error on

SERR#.

Writing a one (1) clears this bit to zero (0).

Yes

Yes/Clr 0

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for PCIE-5565RC Series









































































Search results

Summary of Contents for PCIE-5565RC Series

Reviews:

Related manuals for PCIE-5565RC Series

Brands by name

Popular brands

ABACO PCIE-5565RC Series, Hardware Reference Manual

Search results

Summary of Contents for PCIE-5565RC Series

Reviews:

Related manuals for PCIE-5565RC Series

Brands by name

Popular brands