AAVIX AGT1424S, Owner'S Manual

Page: 5 / 33

5
product settings. Information about
maintenance and repair is provided
in this user manual.
2. Never carelessly touch the product,
you can burn yourself. While the
product is in operation or shortly
thereafter, its parts such as the
exhaust pipe, engine, and other
surfaces are extremely hot! Pay
attention to the markings on the
product.
3. Make sure that the air intake of the
combustion engine is clear. Keep the
air intake free of dust, dirt particles,
fueles and fumes.
4. Make sure that air circulation is
adequate and good. The product
must be easily accessible from all
sides.
5. Always switch the product off and let
it cool down, before refuelling it. Fuel
is highly flammable. Never smoke
when you are refuelling the product.
Do not refuel the product, if there is
an open fire in the vicinity!
6. Always use suitable aids such as
funnels and filler necks. Do not spill
any fuel on the product or its exhaust
system. There is a risk of ignition.
However, if fuel should be spilled,
then you must remove it carefully
from all parts of the product. Any
residue which may be present must
be completely removed, before the
product is operated!
7. Exhaust fueles and fuel fumes are
noxious. Fuel fumes can ignite. Never
use the product in environments
where there is a risk of explosion.
8. Never breathe in any fuel fumes,
when you are refuelling the product.
Never fill the tank in enclosed spaces,
such as basements or sheds. There is a
risk of poisoning and explosion!
9. Avoid skin contact with fuel.
10. Do not eat or drink, while you are
refuelling the product. If you have
swallowed fuel or oil, or if fuel or oil
has got into your eyes, then seek
medical advice immediately.
11. Close the tank lid immediately after
filling the tank. Make sure that it is
properly closed.
12. Never use the product without an air
filter.
13. Do use caution when handling fuel.
To avoid any accidental fires, move
the product at least 3 meter (10’)
from the fuelling point before
starting the engine.
14.
If fuel is ignited, put out the fire with
a dry powder fire extinguisher.
Vibration and noise reduction
To reduce the impact of noise and
vibration emission, limit the time of
operation, use Low-vibration and
low-noise operating modes as well as
wear personal protective equipment.
Take the following points into account to
minimize the vibration and noise
exposure risks:
1. Only use the product as intended by
its design and these instructions.
2. Ensure that the product is in good
condition and well maintained.