18
Carburettor
If the auger fails to operate at
operational speed the carburettor may
need to be adjusted. Please contact an
authorized service centre or similar
qualified specialist.
Skid shoe
The space between the scraper and the
ground can be adjusted by positioning
the skid shoes.
1. Slightly loosen the nuts and adjust the
skid shoes in required position.
2. Fix the skid shoes in a lower or
middle position for close snow removal
on a smooth surface.
3. Fix the skid shoes in an upper position
when the area to be cleared is uneven.
NOTE: Always adjust both skid
shoes in the same position!
General operation
1. Check the product as well as
accessories for damage before each use.
Do not use the product if it is damaged
or shows wear.
2. Double check that accessories are
properly fixed.
3. Check the engine oil level, refill if
necessary.
4. Keep the levers and handles dry and
clean to ensure safe support.
5. Ensure that the air vents are always
unobstructed and clear. Clean them if
necessary with a soft brush. Blocked air
vents may lead to overheating and
damage the product.
6. Switch the product off immediately if
you are disturbed while working by
other people entering the working area.
Always let the product come to
complete stop before putting it down.
7. Do not overwork yourself. Take
regular breaks to ensure you can
concentrate on the work and have full
control over the product.
WARNING! In some
countries regulations
define at what time of
the day and on what special days
products are allowed to be used and
what restrictions apply! Ask your
community for detailed information
and observe the regulations in order to
preserve a peaceful neighborhood and
avoid committing administrative
offences!
Clearing snow
WARNING! Foreign objects,
such as rocks, broken glass,
nails, wire, or string, can be
picked up and thrown by the product,
causing damage and serious personal
injury! Ensure that no hidden objects
are covered by the snow! Remove all
foreign objects from the area to be
cleared before operating the product!
1. Keep the area of operation free of
foreign objects that can become thrown
by the auger. Perform a thorough
inspection of the area since some
objects may be hidden from view by
surrounding snow. If the product hits an
obstruction or picks up a foreign object
during use, stop the product, switch off,
remove the obstruction, and inspect the
Summary of Contents for AGT1424S
Page 1: ......
Page 10: ...10 KNOW YOUR SNOW BLOWER Fig 1 Fig 2 Fig 3...
Page 26: ...26 EXPLODED VIEW...
Page 27: ...27...