AAVIX AGT1424S, Owner'S Manual

Page: 4 / 33

4
proper guards, plates or other safety
protective devices in place.
10. Never operate the product near glass
enclosures, automobiles, window
wells, offs, etc. without proper
adjustment of the snow discharge
angle. Keep children and pets away.
11. Do not overload the product capacity
by attempting to clear snow at too
fast a rate.
12. Never operate the product at high
transport speeds on slippery surfaces.
Use care when reversing.
13. Never direct discharge at bystanders
or allow anyone in front of the
product.
14. Disengage power to the
collector/impeller when product is
transported or not in use.
15. Use only attachments and
accessories approved by the
manufacturer of product (such as
wheel weights, counterweights, cabs,
etc.).
16. Never operate the product without
good visibility or light. Always be sure
of your footing, and keep a firm hold
on the handles. Walk; never run.
17. Do not carry passengers.
18. Never operate the product without
good visibility or light.
19.
Take all possible precautions when
leaving the product unattended.
Disengage the power take-off, lower
the attachments, and shift into
neutral. Set the parking brake. Stop
the engine and remove the key.
Maintenance and storage
1. Check shear bolts; engine-mounted
bolt, etc., at frequent intervals for
proper tightness to be sure the
product is in safe working condition.
2. Never store the product with fuel in
the fuel tank inside a building where
ignition sources are present such as
hot water and space heaters, clothes
dryers, etc. Allow the engine to cool
before storing in any enclosure.
3. Always refer to owner’s guide
instructions for important details if
the product is to be stored for an
extended period.
4. Maintain or replace safety and
instructions labels, as necessary.
5.
Run the product a few minutes after
throwing snow to prevent freeze-up
of the collector/impeller.
Additional warnings
1. If the product starts to vibrate
abnormally, check it immediately.
Excessive vibration can cause injury.
2. Always ensure the product is fully
assembled before using it. Never
attempt to use an incomplete product
or one fitted with an unauthorized
modification.
3.
Do not overload the product.
Fuel handling
1. Follow the maintenance and repair
instructions for this product. Never
carry out any modifications of the
product. Never change the preset
rotary speed or the engine and