AAVIX AGT1424S, Owner'S Manual

Page: 12 / 33

12
WARNING! The product must
be fully assembled before
operation! Do not use a
product that is only partly
assembled or assembled with
damaged parts!
Follow the assembly
instructions step-by-step and
use the pictures provided as a
visual guide to easily assemble
the product.
Secure DO NOT insert the
ignition key in the hole before
assembly, or remove the spark
plug connector
NOTE: Take care of small parts
that are removed during
assembly or when making
adjustments. Keep them secure
to avoid loss.
Handle bar
1. Check the connection of the drive wire
and auger wire before assembling the
upper handle bar.
2. Remove knobs with the washers and
bolts from the lower handle bar.
4. Align the holes on the upper handle
bar with those on the lower handle bar.
5. Secure the connection with the knobs,
bolts, washers.
5. Ensure the auger wire and drive wire
are well connected with auger control
lever and drive control lever.
Discharge chute
1. Remove the pre-assembled bolts and
nuts from the discharge chute.
2. Place the discharge chute onto the
chute seat.
3. Firstly lead the bolts (1, 2) through the
2-side holes of the discharge chute and
chute direction lever. Then, fasten the
nuts. Do not fasten fully.
4. Secondly, lead the bolt through the
middle hole. Fasten all nuts with wrench
to secure the discharge chute assembly.