7
Accessories
7.1
Mega battery pack
The v-max+ is delivered with one mega battery pack with charging electro-
nics.
If you use the v-max+
often, i.e. if there are not sufficient breaks for the
batteries to be recharged, we recommend you obtain an additional mega
battery pack (available as an accessory). In such case one mega battery
pack is in use while the other is being recharged at the same time
.
F
If you do not use the v-max+
both battery packs should be connected to
the charger to increase their durability (see chapter
8.3).
F
Please exclusively use the AAT Alber Antriebstechnik GmbH charger to
charge your mega battery pack
.
7.1.1
Exchange the mega battery pack
1.
Turn off the v-max+ with the On/Off push button.
2.
First remove the power cable from its socket on the v-max
+.
Afterwards remove the plug of the power cable from the socket
on the mega battery pack
.
3.
Please open the velcro strip of the bag and take out the mega
battery pack
.
F
The mega battery pack should always be connected to the charger to ex-
tend its durability (see chapter 8.3).
F
Please exclusively use the AAT Alber Antriebstechnik GmbH charger to
charge your mega battery pack
.
The mega battery pack of the v-max+
is maintenance-free and rechargeab-
le. Its durability depends directly on the number of charging/discharging
cycles
.
7.2
Voltage converter for your vehicle
We recommend the voltage converter for your vehicle, if you transport the
v-max
+
in your car. The AAT voltage converter is designed for a 12 V elec-
trical system. This voltage converter transforms 12 V / 24 V direct current
(D.C.) into 230 V alternating current (A.C.).
The plug of the voltage converter
is plugged into the cigarette lighter in
your car or into the socket of the supply system. The automatic charger’s
230 V connector
is plugged into the socket of the converter
.
28
