background image

4

Safety instructions and hazard notes

F

For a safe operation of the v-max

+

it is important that you observe and

adhere to all warning signs and instructions in this user’s manual as well
as the warning signs and instructions on the device itself

.

All general rules for the safe use of a wheelchair apply without reservation
while operating the v-max

+

. You must always observe the limit values and

instructions indicated by the manufacturer (e.g. air pressure, maximum to-
tal weight, maximum inclination, etc.).

F

Limit values may never be exceeded!

To assure a safe use of the v-max

+

, it is indispensable to observe the follo-

wing directions

:

4.1

Special information concerning the operation:

Generally all of the wheelchair’s specific limiting values indicated by the
manufacturer must be observed.

In the interest of your safety the pushing and braking aid v-max

+

may not

be used on escalators, stairs, moving walkways or unfortified surfaces. You
may only move the wheelchair plus mounted v-max

+

manually (see chap-

ter 3.3), if the device is turned off. Please observe the instructions and li-
miting values of your wheelchair’s manufacturer.

Please first get familiar with the handling characteristics and riding quali-
ties of the device. Please drive first on level ground until you feel comfor-
table in handling the

v-max

+ safely. Practise at a low speed.

F

Always turn the speed control to its lowest speed when you begin using
the device and increase the speed slowly to the desired tempo.

F

Please lower the speed before driving down an incline.

F

Please do not roll down an incline with the v-max+ disengaged!

Even though the v-max+ manages inclines up to 12%, the wheelchair
manufacturer’s stipulated maximum incline may under no circumstances
be exceeded. (Ramps in public buildings have an incline of approximately
6 %.)

F

Please cross over obstacles such as curbs on sidewalks with a turned off
v-max

+

. Crossing over higher curbs should be done backwards because

the rollers may jackknife. Please pull the wheelchair at its grips not at
the ones of the v-max

+

. Also always check the height of your anti-tilt sup-

port and keep in mind the wheelchair manufacturer’s stipulated maxi-
mum height

.

The current road traffic regulations apply when you use the v-max

+

on

public roads. Should there be additional devices necessary, you need to
mount them to your wheelchair as soon as possible. In such case, please
contact your local dealer

.

Please avoid driving parallel on steep slopes to avoid a tilting over side-
ways of your wheelchair. Always counter-steer when the curb on the side-
walk is slanting downward and remain at a safe distance to the curb.

Please do not drive to the edge of stairs or precipices with the v-max

+

tur-

ned on

.

F

Please do not attach anything to the

v-max+'s grip!

18

Summary of Contents for V-MAX+





































Reviews: