3
Assembly and initial operation
The v-max+
can only be used in connection with a special bracket which
must be mounted to your wheelchair
.
This bracket may only be mounted by AAT or dealers authorized by AAT
.
3.1
Brackets
All brackets are especially developed and adjusted to each individual
wheelchair, which means that the bracket
,
right and
left,
pictured in
this operator’s manual may differ from the one attached to your wheel-
chair
.
F
Before each use, check whether the bracket is securely fastened to the
wheelchair. In case screws have loosened or fallen out you may not use
the
v-max+.
Please contact your dealer immediately
.
F
Please note that mounting the
v-max+
to a wheelchair (depending on the
model) may result in restricting the adjustment of its seat or back rest
.
F
Mounting the v-max+
to a wheelchair (depending on the model) may re-
sult in a change of the wheelchair’s measurements
.
3.1.1
Attach and detach the wheels
Full-floating axles: with your index finger press the locking bolt in the
middle of the axle to release the connection and the wheel can be taken
off.
Instantaneous axis: remove the cover and loosen the nut with a flat
wrench. Now pull the instantaneous axis through the opening and take off
the wheel.
Always remove first one and then the other wheelchair wheel.
To mount the wheels on the wheelchair, please follow these instructions in
reverse order.
3.2
Mega battery pack
A bag for the battery pack is attached under the seat of the wheelchair
.
Simply slide the mega battery pack into its bag
and fix it with a velcro strap
.
12
