8.3.1
Charging with the automatic charger
To charge the batteries you may leave the mega battery pack in its bag at-
tached to the wheelchair. First pull the plug of the power cable then in-
sert the plug of the charger entirely into the charging socket. Finally plug
the charger into the wall outlet
.
F
Since the v-max+
is supposed to be connected to the charger at all times
whenever it is not in use, you need to remove the charger from the wall
outlet and pull the plug from the charging socket on the battery pack
every time before you use it
.
F
Before charging, please read and follow all instructions and warning no-
tes printed on the charger
.
F
Exclusively use the AAT Alber Antriebstechnik GmbH charger.
F
Never touch the plug with moist hands
!
Signals of the charger
8.3.2
Charging batteries in your vehicle
By means of the voltage voltage converter you may even charge your
mega battery pack while driving your car.
First remove the power cable. Then fully insert the plug of the charger
into the charging socket on the mega battery pack. Then connect the
charger to the voltage voltage converter. Finally you plug the voltage con-
verter into the cigarette lighter.
Afterwards you first pull the voltage converter’s plug from the cigarette
lighter before you disconnect it from the charger.
Signals of the charger and the voltage converter
32
charger
LED orange
batteries are being charged
charger
LED green
batteries are fully charged, maintenance mode
charger
LED orange
batteries are being charged
charger
LED green
batteries are fully charged, maintenance mode
voltage converter
beeping
12 V supply is low
