manualshive.com logo in svg

AAT s-max D1601, Original User Manual

Share
Download
AAT s-max D1601 Original User Manual Download Page 29

29

8.7  Laying the device down on the stairs / emergency stop function

Lay down the s-max 

 

» Safety brakes prevent from 

rolling down!

 

» Keep the UP/DOWN switch

 pressed until the climber is 

fully retracted.

Please note:

 When laying 

down the s-max on the 

stairs it 

has

 to lie on its main 

wheels. Otherwise the safety 

brakes may not grip!

Emergency stop function

In hazardous situations follow the next steps:

 

» 1 - Release the UP/DOWN switch

 

» 2 - Turn off the s-max by pressing the ON/OFF switch

 

» 3 - Pull out the safety chip for the engine immobiliser

 

» Lay down the s-max as mentioned

Eliminate the hazardous situation and start climbing again

 

»

Insert the safety chip

 

»

Switch on s-max via the ON/OFF switch

 

»

Press the UP/DOWN switch

8.8  Parking

i

  NOTE - Only park the s-max on fl at ground.

i

  NOTE - Charge the battery pack after each use.

The automatic switch-off turns it off during longer periods of inactivity. 

Turn the s-max 

OFF

 fi rst and then 

ON

.

Set in neutral position.

 

» Climber must be fully 

retracted.

Turn off s-max by pressing 

the ON/OFF switch.

Pull out the safety chip for 

engine immobiliser.

Summary of Contents for s-max D1601









































Reviews:

No comments

Brands by name

Popular brands

Load more brands