manualshive.com logo in svg

AAT s-max D1601, Original User Manual

Share
Download
AAT s-max D1601 Original User Manual Download Page 14

14

5  Assembly and start-up

5.1  Handle unit

 WARNING  -  The handle unit must be securely fixed with the locking screw so it is safely 

connected to the climbing unit! 

WARNING - the climbing unit attachment may only be set by the manufacturer, the AAT field 

team or authorised specialist dealers! 

 

A 9-pin sub-D coupling in the attachment establishes the electrical connection.

Connect the handle unitand 

climbing unit.

 

»

The attachment must be 

aligned parallel to the 

housing.

Secure connection with the 

standpipe  fixing  knob.  Both 

units must be connected 

safely.

5.2  Battery pack

 WARNING - The battery pack has to be locked safely, otherwise it may move involuntarily!

 

Assembly  

Insert the battery 

pack into the opening 

provided for this purpose in 

the climbing unit.

 

»

The battery latch locks 

automatically.

Disassembly  

Loosen latch.

 

»

Press down the release 

button on the climbing unit, 

then remove the battery 

pack.

i

Summary of Contents for s-max D1601









































Reviews:

No comments

Brands by name

Popular brands

Load more brands