background image

F

Plea se be ca re ful when going downhill with full bat te ries. The dri ve

down  ge ner ates  elec tri ci ty  which  char ges  the  bat te ries  ad di tio nal ly.

This may lead to ex cess vol ta ge which in turn may lead to a tur ning

off of the mo vi li no. Du ring re gu lar use the de vi ce re du ces its speed

au to ma ti cal ly  to  avoid  over vol ta ge.

F

If the bat te ries are emp ty, the de vi ce goes into un der vol ta ge. It

stops. Yet the hub mo tor still dri ves up ward so you may push the

wheel chair  ma nu al ly.

4.9

Power unit:

The mo vi li no plus its po wer unit is for the most part co -

ver ed by the hou sing. Ne ver the less, plea se make sure that whi le dri ving you

do not put fin gers or hands into the ro ta ting area (e.g. chain wheel or dri ving

pi ni on). Al ways keep a safe dis tan ce.

4.10 Transport:

You may re mo ve the movilino’s hand le unit (see chap ter

3.1)  for  trans por ta ti on.  Plea se  lift  the  po wer  unit  ex clu si ve ly  by  its  re ces sed

hand le (see chap ter 2.2.2)

F

Al ways  turn  off  the  mo vi li no  for  trans por ta ti on!

F

Du ring dri ve rests ac ti va te the lo cking bra kes of the wheel chair

.

F

When you trans port the de vi ce in ve hi cles, plea se se cu re it ac cor -

ding to the re le vant le gal re gu la tions in your coun try.

4.11 Moun ting the brackets:

At ta ching the movilino’s bra ckets to the

wheel chair or ma king chan ges on said bra ckets may only be per for med by

the  com pa ny  AAT  Al ber  An triebs tech nik  or  their  aut ho ri zed  dea lers.
The mo vi li no may only be at ta ched to wheel chairs which must be che cked

ac cor ding  to  ge ne ral ly  ac knowled ged  tech ni cal  norms,  and  their  ope ra tor's

ma nu als must be ap plied when using the mo vi li no.
Be fo re each use plea se check all the hol ding de vi ces and at tach ments. Also

make sure that the de vi ce it self functions pro per ly. Should any thing not

work you may not use the mo vi li no. In that event, plea se con tact your lo cal

dea ler.

4.12 Technical requirements:

F

You may not re mo ve the wheelchair’s wheels!

Plea se al ways check the air pres su re of pneu ma tic stee ring rol lers. The mo -

vi li no  dri ving  qua li ties  could  be  af fec ted  ne ga ti ve ly,  if  the re  is  not  enough

air in the rol lers.
The air pres su re in the wheelchair’s wheels must cor re spond to the wheel -

chair  manufacturer’s  sti pu la tions.
The run ning wheels’ con di ti on also must be che cked be fo re each use.

Should the wheels have rea ched their wear li mit (see chap ter 4.4) you may

not use the mo vi li no.
Af ter you have in ser ted the sa fe ty chip for the en gi ne im mo bi li ser into its

pro per slot on the hand le the mo vi li no is rea dy to go. The re fo re, plea se al -

ways check whet her the chip is pro per ly in ser ted be fo re you use the de vi ce.
The wheelchair’s  lo cking bra kes must be at ta ched in such a way that the at -

ten dant may re ach them ea si ly.

23

movilino

Summary of Contents for Movilino






































Reviews: