manualshive.com logo in svg

Aastra S850i, Administrator'S Manual

Share
Download
Aastra S850i Administrator'S Manual Download Page 80

Web Interface

 

80

41-001516-00 REV00 – 06.2013

Language and Country

Importing and Exporting Configuration Settings

Through the Web Interface you can import and export S850i configuration settings. These features are particularly useful 
if you are installing several S850is and want them all to use the same base set of configuration values. 

A common procedure would be to configure one S850i as desired, ensure that it is working properly in your environ-
ment, and then export the configuration settings for that phone. Then, you would use that configuration file as a starting 
point for the other phones, importing that file into each of the other phones. 

The export process creates a single XML file that includes all the core settings, excluding the following:

•

Static IP Address

•

SIP ID

•

Display Name

•

Username

•

Password

Below is an illustration of the Import/Export page.

Recent Call Enabled

Use the Recent Call Enabled option to enable or disable the Recent Calls list on the S850i Handset/Dialer. The default 
setting is On.

Web Access Enabled

Use the Web Access Enabled option to enable or disable the S850i Web Interface. If access is enabled, users can browse 
to the S850i using a web browser. Even if enabled, the Web Interface is password protected for all pages. It is restricted 
to Administrator use. If disabled, any web-access is rejected. Once web access is disabled, it can only be enabled again 
by an administrator from the Handset/Dialer. The default setting is On.

Language and Country

Language

Select the Handset/Dialer language from the list of available languages.

Country/Region

Select the country or region you are in. This selection will affect country specific settings. Please change this setting 
from the current region to another region only if you move the unit to that different country/region, or if advised by 
Aastra support to do so.

Access Control

Summary of Contents for S850i






































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands