Web Interface
41-001516-00 REV00 – 06.2013
79
RF Setting
Use the RF Setting page to set the Radio Frequency (RF) signal strength of the wireless BASE unit and Microphones. There
are three RF Power settings: High, Medium, and Low. The default is High. Low or Medium can be selected to reduce the
signal strength. Lower signal strength reduces the maximum distance between the Wireless Base Unit and any of the wire-
less devices. A lower setting might be desirable in environments where more wireless DECT traffic is encountered.
The illustration below shows the RF Setting page. It is not necessary to restart the phone after changing the RF Power set-
ting, but it is necessary to press “Save” for the change to be taken into the phone.
Access Control
Use the Access Control page to set the system password, enable or disable the Recent Call list on the S850i Handset/Dialer,
and enable or disable web access. The illustration below shows the Access Control page. You do not need to restart the
phone for changes to take effect, but will need to press “Save” for the change to be taken into the phone.
Advanced Audio Settings
All Mic Mute
If “All Mic Mute” is On, all active Microphones are affected when a mute button is pressed. If one or more active Micro-
phones are outside the Charger Tray, pressing the mute button will change the mute status on all Microphones outside
of the Charger Tray. Microphones in the Charger Tray will not be affected and will stay muted at all times. If all Micro-
phones are in the Charger Tray, pressing the mute button will change the mute status of all Microphones in the Charger
Tray. The default for “All Mic Mute"” is Off.
Start Mute
The “Start Unmute” option specifies that Microphones will be unmuted when taken out of the Charger. The default
value is On.
Aux In, Aux Out
The “Aux In” and “Aux Out” settings are used to enable and disable Aux audio connections on the S850i Wireless Base
Unit.
Aux In Level,
Aux Out Level
The “Aux In” and “Aux Out” settings are used to change the level of the Aux In and Out signals. The range is 1-15.
Aux Out Mic/Line
Use Aux Out Mic/Line to set the level of the Aux Out connectors to either Mic level or Line level.
Access Control
Password
The password is used to control access to the Web Interface and the advanced Administrator settings on the S850i
Handset/Dialer. The password must be four digits. The default password is 2222. This password should be changed by
the system administrator. Please ensure that you take note of the changed password.
