9
Quick charge
The Mæstro 4625 comes with a
reduced charge time feature called
“Quick charge”. Simply place the
handset on the base (no need to
turn the handset switch off). The
Mæstro 4625 is able to determine
how long the handset battery needs
to recharge. When the handset is in
the base and Quick charge is
activated, the display message
battery charging...
will be
displayed.
A completely empty battery will
only take 4-5 hours to fully
recharge. The handset may be left
on the base even after Quick charge
is finished. A “trickle” charge will
keep the battery fully charged.
During trickle charge you may view
the Battery level indicator by
pressing the
NEXT
display key.
We recommend that you keep the
handset as close to normal room
temperature as possible. In cases of
extreme heat or cold (outside in the
heat or cold), the Battery level
indicator may not display
accurately. To ensure a fully
charged battery, charge the handset
for at least 5 hours. Battery life may
be affected by continued exposure
to extreme heat or cold.
Note:
Its recommended that you
only charge the battery once the
Battery low
message is displayed.
Battery level indicator
You may check the battery level of
your handset by pressing the
NEXT
display key
when at the idle display.
You may check this indicator when
the handset is in or out of the base.
Battery saver mode
The handset saves battery power by
going into battery saver mode 45
seconds after the last key press. In
this mode, the display “sleeps”
(goes blank), but the handset still
receives calls. When you use the
handset again the display
automatically “wakes up” (shows
information). If it doesn’t, make
sure the handset power switch is
on.
[ ]
[ ]
[ ]
Battery
NEXT
Battery
NEXT
Battery
NEXT
- -
- Battery is fully charged
- Battery is 2/3 charged
- Battery is 1/3 charged
- -