21
1. Press
s
.
2. Enter the number using the dial pad.
Numbers can have up to 16 digits. If you
require a pause (for example, between
a telephone number and an access
code), press
h
where you
want the pause.
Note:
Each pause is 2 seconds. Enter
as many pauses as you need. A
P
indicates a pause has been
entered.
3. Press the
DONE
display key.
4. If you don’t want to enter a name press
DONE
.
To enter a name, use the dial pad. (See
Rules for entering names, on this page.)
If you make a mistake, use the
d
,
<
, and
>
keys.
5. To quit and start over, press
e
.
6. Press the
DONE
display key.
1. Ensure that a number is on the display.
(This could be a predialed, redialed, or
Callers List number.)
2. Press
s
.
3. Follow the instructions on the display.
4. If you entered a name, press the
DONE
display key.
Entering names
1. Press the key with the desired letter
repeatedly until that letter appears on
the display.
The letters are printed on the dial pad
keys. Names can have up to 16
characters.
2. Advance to the next letter by pressing
the
>
key or the
SKIP
display key.
3. Use
<
to move backward to insert or
delete letters.
4. Press
d
to delete a letter.
5. Press the
[
or
]
to change the case
for each letter.
6. Press the
SPACE
display key to enter a
space between letters.
7. When you have finished, press the
DONE
display key.
Note:
You don’t always have to
press the
>
key if the next
letter is on a different key.
Example:
To enter the name
Ruth
, press:
‡‡‡
,
°°
,
>
,
°
,
››
.
Chart for special characters
The following symbols are not
shown on your dial pad keys.
To save a number from the display
Rules for entering names
Symbol
& ‘ ( ) , - .
Press
⁄
until the desired
symbol is displayed.
