1531-DBC 422 02 Uen B3 2013-12-02
70
I
NSTALLATION
If the phone is not automatically logged on after the configuration file is
read, there are the following possibilities to enter the default directory
number and or the password:
•
Enter the administrator mode and the
Log on with
menu will
appear after a while. Log on with the default number and the pass-
word.
•
Use the administrator web interface.
7.34.3
Allocation of function keys
Most of the functions allocated to the function keys can be moved or
removed, but the Line key(s) are fixed. If the default allocation is to be
changed, the system administrator has to modify the configuration file,
see description for
CONFIGURATION FILE FOR DBC 42X
.
To enable storing the Dial-by-function key (TNS) numbers in the PBX,
7.42 Dial-by-function keys on page 78.
In the case when the numbers associated with TNS keys are stored in
the PBX, special attention is needed to avoid problems that keys are
moved upwards or downwards when function keys are added or erased.
For more details, see description for
CONFIGURATION FILE FOR DBC
42X
section FUNCTION KEYS.
When the DBC 422 phone is used with MX-ONE TSW or TSE there are
no spare function keys available, if the default configuration is used. To
make it possible to initiate TNS or MNS numbers the function on at least
one of the function keys must first be removed, see description for
CONFIGURATION FILE FOR DBC 42X
.
7.34.4
Change IP settings in DBC 422
It is possible to use the menus in the phone or the web interface to
change the IP settings. When using the menus, select the
Settings
menu by using the
Settings
key, enter the administrator mode, press
+
until the
Network
menu appears. Select Network and the list with
network settings is shown. Below is an overview of all the
Network
menus:
