INSTALLATION INSTRUCTION
19 (50)
Prepared (also subject responsible if other)
No.
Mario PRANZL
6/1537-ASB 150 02 Uen
Approved
Checked
Date
Rev
Reference
Ulf SÖDERMARK
2012-02-16
H
4.3
ISDN SIP GW configuration to SIP Operator (Per Gateway)
Connect with a web browser to ISDN SIP GW and log in with user name and password. Configure
the following points for the SIP connection to SIP Operator.
The following parameters give an overview how a SIP Operator configuration can look like.
Adaptations for different providers will be necessary (e.g. Register per Gateway or Endpoint, …).
•
Go to Configuration (Full) / Network Settings / Application Settings and set
DNS Settings: (Network Dependent)
Parameter
Value
DNS Primary Server IP
x.x.x.x
DNS Secondary Server IP
x.x.x.x
STUN Settings: (Network Dependent)
Parameter
Value
Enable STUN
Disable
Enable
STUN Server Primary IP
x.x.x.x
STUN Server Secondary IP
x.x.x.x
STUN Settings: Is required, if you run ISDN SIG GW behind a NAT router and a public
dynamic IP address is used. The STUN Server should be provided by operator.
DHCP Settings: (Network Dependent)
Parameter
Value
Enable DHCP
Disable
Enable
