manualshive.com logo in svg

Aastra Ascotel IntelliGate 2025, System Manual

Share
Download
Aastra Ascotel IntelliGate 2025 System Manual Download Page 88

Interfaces and Terminals as of I7.8

88

Terminals

sy

d-

023

9/2.

4 

– I7.

8

 – 0

7

.2009

3. 6. 3

IP system terminals Aastra 5360ip, Aastra 5370ip, 
Aastra 5380ip

These IP terminals can be both desktop-mounted and wall-mounted.

Installation

The following points are described in detail in the User’s Guides for Aastra 5360ip/
5370ip/5380ip:

•

Set-up as a desktop phone (choice of two different set-up angles)

•

Wall mounting

•

Connecting one or more Aastra M530 or Aastra M535 expansion keypads

•

Connection to the LAN and possibly to the power supply

The Aastra 5380ip can also be equipped with a Bluetooth® module as an option. 
The assembly procedure is the same as for an Aastra 5380 and as described on 

page 85

.

Power supply

The Aastra 5360ip, Aastra 5370ip and Aastra 5380ip terminals are powered either 
via a plug-in power supply unit or via Power over Ethernet (PoE).

Plug-in power supply unit:
Only use the corresponding plug-in power supply unit with jack socket available as 
an option.

Power over Ethernet (PoE):
The terminals support PoE in accordance with the IEEE 802.3af standard, i. e. the 
power supply is provided either via the data lines (Variant 1) or via the free lines 
(Variant 2), but not via both.

Summary of Contents for Ascotel IntelliGate 2025
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands