manualshive.com logo in svg

Aastra Ascotel IntelliGate 2025, System Manual, Page: 80 / 111

Share
Download
Aastra Ascotel IntelliGate 2025 System Manual Download Page 80

Interfaces and Terminals as of I7.8

80

Terminals

sy

d-

023

9/2.

4 

– I7.

8

 – 0

7

.2009

User allocation

Each terminal is allocated to a user in the configuration. If a terminal has been cre-
ated at the connected port and the address selection switch is correctly selected 
but no user is allocated to the terminal, the terminal display reads 

No Number

 and 

indicates the terminal ID. In this state the terminal is not ready for operation.

Terminal type

The terminal type is specified along with the configuration of the system. when the 
lines are also assigned to the line keys.

Note:

If the terminal type configured is incorrect, the terminal display shows 
the warning 

Wrong terminal type

. On the Office 10 the LED flashes slowly. 

In this situation, although the terminal can be used for basic telephone 
operations, none of the added features will be available. The terminal 
type must be entered via the AIMS Configuration Manager or on the ter-
minal via login to the PBX.

Carrying out a logon on the terminal:

– Office 10: Press the Foxkey twice.

– All other system terminals: Long keypress (long click) on a function 

key. 

Log on new set

 appears next. Confirm with Foxkey 

Yes

.

Self-tests for AD2 terminals

Once the terminal has been checked with regard to connections, unlocking, etc., 
the self-test can be used to detect possible sources of error.

Summary of Contents for Ascotel IntelliGate 2025
















































































































Reviews:

No comments