Aastra Ascotel IntelliGate 2025 System Manual Download Page 65

Page: 65 / 111

Interfaces and Terminals as of I7.8

Terminals

023

9/2.

– I7.

– 0

.2009

3. 4. 1

Hardphone Aastra 5360ip

With the exception of the differences mentioned below, the features of the
Aastra 5360ip correspond to those of the Aastra 5360 (see

page 49

Fig. 32

Aastra 5360ip

Differences compared with the Aastra 5360:

•

IP telephony at an affordable price suitable remote workstations with standard
requirements

•

Graphics-compatible display with 16 characters (upper and lower case letters)
and one symbol line

•

Power supply via PoE or plug-in power supply (optional)

3. 4. 2

Hardphone Aastra 5370ip

With the exception of the differences mentioned below, the features of the
Aastra 5370ip correspond to those of the Aastra 5370 (see

page 50

Fig. 33

Aastra 5370ip

Summary of Contents for Ascotel IntelliGate 2025
















































































































Search results

Summary of Contents for Ascotel IntelliGate 2025

Reviews:

Aastra Ascotel IntelliGate 2025, System Manual, Page: 65 / 111

Search results

Summary of Contents for Ascotel IntelliGate 2025

Reviews: