manualshive.com logo in svg

Aastra Ascotel IntelliGate 2025, System Manual, Page: 21 / 111

Share
Download
Aastra Ascotel IntelliGate 2025 System Manual Download Page 21

Interfaces and Terminals as of I7.8

System Interfaces

21

sy

d-

023

9/2.

4 

– I7.

8

 – 0

7

.2009

2. 1. 3

SIP access

The PBX can be connected to one or more SIP providers via the Ethernet interface 
on the basic system. The PBX supports 10 SIP access with up to 30 channels per SIP 
access. One 

SIP Access Channels

 licence is required for each channel.

The PBX handles the SIP access in the same way as analogue or digital network in-
terfaces, i. e. they are grouped in one or more separate trunk groups. Allocation to 
an SIP provider is defined for each trunk group. This means that international calls 
can be routed via SIP providers in different countries for example.

The PBX must register with a registrar of the SIP provider so that the SIP messages 
can be forwarded to the proxy server and from there to the public network, for ex-
ample via a gateway. At least one SIP account has to be set up for each SIP provider. 
Each account contains a user name and password for identification with the regis-
trar and an SIP identification number (SIP-ID). The SIP-ID is linked with a direct dial 
number so that outgoing and incoming connections can be made. A total of 500 
SIP accounts can be set up and linked with the corresponding direct dialling num-
bers.

One SIP account per SIP provider can be set up as a default account. It can then be 
used by users without an SIP account for outgoing calls via a corresponding route 
or for incoming calls via a special call routing.

Besides the connection of Ascotel® IntelliGate® to one or more SIP providers, sev-
eral Ascotel® IntelliGate® systems can also be networked via SIP.

System configuration

The tables below list the AIMS configuration parameters required.

Tab. 2

SIP provider configuration: General

Parameter

Parameter value

Remarks

Name

<Name>

Name of the SIP service provider

Broadband range

<Name>

Predefined broadband range used for this 
SIP provider.

Use ‘+’ for the international 
prefix

<

Yes / No

>

If the provider requires the number in 
canonical number format, the parameter 
must be set to 

Yes

.

Try to make external calls: 
Timeout

<4...36> sec.

Indicates how long the system attempts 
to dial via an SIP exchange before it 
switches to the next trunk group in the 
route. (Default Value: 32 s )

’From’ field for CLIR

<

Anonymous (RFC 3261) / Transfer 

from SIP account (RFC 3323) / Name 
displayed is ‘Anonymous’

>

Display shown to the recipient in the case 
of an outgoing call with activated CLIR

Summary of Contents for Ascotel IntelliGate 2025
















































































































Reviews:

No comments