Aastra AASTRA 9133 I User Manual Download Page 48

Page: 48 / 62

Appendix A, Customize your 9133i Phone

Aastra – 2758-002

Set Time and Date Manually

If you set the time manually, the phone will not try to synchronize the time with the time
server until the next time the phone is restarted.

Step

Action

Go to the

Time and Date

option.

The Time and Date screen displays.

The first item in the menu is Time
Server.

Time Server:

Do not alter any parameters in the Time Server option.

Set Time:

Displays the network time if the Time Server option is enabled and also allows you to set
the time manually.

If you set the time manually, the phone will not try to synchronize the time with the Time
Server until the next time the phone is restarted.

Press

Next

to go to the

Set Time

option.

The Set Time screen displays.

Use the keypad to enter the time.

Press

the

key to toggle between AM

and PM.

Press

Set

The

message

displays.

Summary of Contents for AASTRA 9133 I































































Search results

Summary of Contents for AASTRA 9133 I

Reviews:

Related manuals for AASTRA 9133 I

Brands by name

Popular brands

Aastra AASTRA 9133 I, User Manual

Search results

Summary of Contents for AASTRA 9133 I

Reviews:

Related manuals for AASTRA 9133 I

Brands by name

Popular brands