Aastra AASTRA 9133 I User Manual Download Page 42

Page: 42 / 62

Chapter 4, Phone Features

Aastra – 2758-002

Missed Calls Indicator

The 9133i displays the “<Number of> Missed Calls” in the idle state screen display.

2010

John Smith

2 Missed Calls

This display alternates
between the time and
date and the number of
missed calls

As the number of missed calls increments:

•

The phone numbers associated with the calls are stored in the Callers List

When you review the calls in the Callers List:

•

The number of missed calls is cleared from the idle screen display.

Access Missed Calls

Step

Action

Result

Press

the

Callers

key.

The Callers List menu displays.

Use

to scroll through the

entries.

Missed calls are those marked with the
telephone icon with the handset ON

Delete Entries in the Callers List

The delete key is Hard Key #4 at the top right of the phone.

Step

Action

Result

Delete all entries:

Press

the

Callers

key.

The Callers list opens.

Press

the

Delete

key

at the Callers List

header.

The Delete confirmation message
displays.

Press

the

Delete

key again to confirm.

The entire Callers list is deleted.

Summary of Contents for AASTRA 9133 I































































Search results

Summary of Contents for AASTRA 9133 I

Reviews:

Related manuals for AASTRA 9133 I

Brands by name

Popular brands

Aastra AASTRA 9133 I, User Manual

Search results

Summary of Contents for AASTRA 9133 I

Reviews:

Related manuals for AASTRA 9133 I

Brands by name

Popular brands