Aastra AASTRA 9133 I User Manual Download Page 43

Page: 43 / 62

9133i IP Phone User Guide for SPN

Aastra - 2758-002

Step

Action

Result

Delete only one entry:

Find the entry to delete.

Press

the

Delete

key.

The Delete confirmation displays:

Press

the

Delete

key again to confirm.

The entry is deleted.

Cancel the delete function:

Press

Exit the Callers List

Step

Action

Result

•

Press the

Goodbye

key.

•

Press the

Callers

key.

The idle screen displays.

Redial

Last Number Redial

You can redial the last number you dialed using the Redial key.

Step

Action

Result

Redial (Off-hook):

Lift the handset.

The last number you dialed displays on
the screen.

Press

the

Redial

key 1 time.

The number is automatically dialed.

Redial (On-hook):

•

Press the

Redial

key 2 times.

•

Press the

Redial

key 1 time.

•

Go off-hook.

The last number you dialed displays on
the screen and is automatically dialed.

Summary of Contents for AASTRA 9133 I































































Search results

Summary of Contents for AASTRA 9133 I

Reviews:

Related manuals for AASTRA 9133 I

Brands by name

Popular brands

Aastra AASTRA 9133 I, User Manual

Search results

Summary of Contents for AASTRA 9133 I

Reviews:

Related manuals for AASTRA 9133 I

Brands by name

Popular brands