Sylantro Interoperability Features
RN-001029-00, Rev 03, Release 2.1
55
5i Series IP Phone Release Notes
AutoDial Per-Line Configuration
Parameter
–
sip autodial timeout
Autodial Timeout
(in Web UI)
Aastra Web UI
Advanced Settings>Global SIP>
Autodial Settings
Configuration Files
aastra.cfg, <mac>.cfg
Description
Globally specifies the time, in seconds, that the phone waits to dial a
preconfigured number after the handset is lifted from the IP phone
cradle.
If this parameter is set to 0 (hotline), the phone immediately dials a
preconfigured number when you lift the handset. If this parameter is set
to a value greater than 0, the phone waits the specified number of
seconds before dialing the preconfigured number (warmline) when you
lift the handset.
Default is 0 (hotline).
Format
Integer
Default Value
0
Range
0 to 120
Examples
sip autodial timeout: 30
Parameter
–
sip lineN autodial number
Autodial Number
(in Web UI)
Aastra Web UI
Advanced Settings>LineN>Autodial Settings
Configuration Files
aastra.cfg, <mac>.cfg
Description
On a per-line basis, this parameter specifies the SIP phone number that
the IP phone autodials when the handset is lifted from the phone cradle.
Valid values can be:
-1
(Default) The phone uses the global
autodial setting for this line.
Blank
(Empty field) Disables autodial on this line.
Valid SIP Number
Dials the SIP number specified for this line.
Format
Integer
Default Value
-1
Range
Any valid SIP number.
Examples
sip line1 autodial number: 8500
