Sylantro Interoperability Features
56
RN-001029-00, Rev 03, Release 2.1
IP Phone Release Notes 2.1
Parameter
–
sip lineN autodial timeout
AutoDial Timeout
(in Web UI)
Aastra Web UI
Advanced Settings>LineN>Autodial Settings
Configuration Files
aastra.cfg, <mac>.cfg
Description
On a per-line basis, this parameter specifies the time, in seconds, that
the phone waits to dial a preconfigured number after the handset is
lifted from the IP phone cradle.
If this parameter is set to 0 (hotline), the phone immediately dials a
preconfigured number when you lift the handset. If this parameter is set
to a value greater than 0, the phone waits the specified number of
seconds before dialing the preconfigured number (warmline) when you
lift the handset.
Default is 0 (hotline).
Format
Integer
Default Value
0
Range
0 to 120
Examples
sip line1 autodial timeout: 30
