11
intercom mode. Intercom mode is also terminated after five minutes of inactivity --- i.e. five
minutes after the last gate command, or five minutes after it is started if no gate commands
are given.
Intercom mode and use of the keypad are mutually exclusive: if someone is in the middle of
entering a four digit code on the keypad (i.e. after the first numeric key is pressed, and until
the operation finishes), the call button will not work and the receiver cannot call the gate. If
the call button has been pressed, or the receiver has called the gate, the keypad will not work
until the system is back in idle mode. The remote open mode for the event input will work
while the unit is in all modes except program mode.
INDOOR COMMAND CODE(s) REFERENCE
** - Toggle A Relay
*# - Latch A Relay
*1 - Toggle A Relay (again)
*2 - Toggle B Relay
*3 - Activate the intercom
*5 - Toggle One Shot (enable / disable)
*9 - Toggle Sleep (enable / disable)
PhoneAire Keypad
ACCESS & FUNCTION CODES
The PhoneAire may be programmed with 500 multiple (4 digit) access codes, the number of
access codes is reflected in the model number There are two different types of codes,
access codes & function codes. Although the number of access codes may vary , the number
of function codes is always 4.
FUNCTION
CODES
"MASTER CODE"
This code is a programmable four digit code
used for gaining access to the program mode.
It does not activate the control relay.
The factory default master code is 1 2 5 1.
"LATCH CODE"
This code is a programmable four digit code
used to toggle relay A. This code will be used
to hold open a gate or door.
"SLEEP CODE"
This code is a programmable four digit code
which
when
entered,
will
disable
all
codes.
When the "SLEEP CODE" is entered again the
