
Zone
Zone
APPENDIX - SYSTEM CONFIGURATION
RSMV-HP Technical Guide
28
Single Compressor Con
fi
guration
Select this confi guration if the RSMV only has one Compressor
wired to it. If there are two Compressors, leave this selection blank.
Single Evaporator Coil Con
fi
guration
Select this confi guration if the RSMV only has one Expansion Valve
wired to it. If there are two Expansion Valves, leave this selection
blank.
Fixed Compressors Con
fi
guration
Select this confi guration if the RSMV only has Fixed Compressors
wired to it. If the fi rst Compressor is Modulating, leave this selection
blank.
Single Condenser Coil Expansion Valve
Con
fi
guration
This configuration only applies when using the RSMV-HP.
Select this confi guration when Expansion Valve 3 is wired and
Expansion Valve 4 is not wired. If both are connected, leave this
selection blank.
Copeland VFD Con
fi
guration
Select this confi guration if the RSMV is controlling a Copeland
VFD through the MODBUS connection.
Single Compressor Startup
Select this confi guration if the desired startup routine enables one
compressor at a time on the system. Leaving this blank makes the
fi rst compressor on each module enabled at startup which is the
default method. Most systems require the fi rst compressor on each
module to be enabled to achieve the full evaporator coil face active.
Figure 10: Prism 2 RSMV Confi guration Screen
System Con
fi
guration Using Prism 2
Refer to
Figure 10
below in setting RSMV confi guration options.
System Con
fi
gurations
Summary of Contents for RSMV-HP
Page 1: ...RSMV HP Technical Guide ...
Page 29: ...RSMV HP Technical Guide NOTES 29 ...
Page 30: ...NOTES RSMV HP Technical Guide 30 ...