
RSMV-HP Technical Guide
APPENDIX: CONDENSER OPTIONS
27
Single Condenser for Four Modules
Single Condenser for 4 Modules
In Single Condenser for 4 Modules wiring configuration, the
Condenser Signal is wired to AO2 on the 1st module but not the
2nd, 3rd, or 4th modules and the Condenser Relay RLY3 is enabled
on the 1st module but not the 2nd, 3rd, or 4th modules. Refer to the
fi gures below for Prism 2 confi guration and Modular Service Tool
Screen selection.
RSMV & RSMV-HP Condenser Options
Con
fi
guration Screen
RSM#1-4 CONFIGURATION
Condenser Options
1 Cond for 4 RSMVs
USE < or > TO CHANGE
Select the “1 Condenser for 4 RSMVs” option on the above Hand
Held Service Tool Screen.
Figure 9: Prism 2 Condenser Confi guration
Summary of Contents for RSMV-HP
Page 1: ...RSMV HP Technical Guide ...
Page 29: ...RSMV HP Technical Guide NOTES 29 ...
Page 30: ...NOTES RSMV HP Technical Guide 30 ...