17
Figure 5 - Blower Assembly with Captive
Panel
3)
Pull the blower assembly out of the unit.
Figure 6 - Blower Assembly, Shown Pulled
Away From Blower Panel
Lifting and Handling the Unit
Before lifting unit, be sure that all shipping
material has been removed from unit.
Unit may be lifted with a pallet jack.
Service Access
Several components are accessible through
the service access panels of the WV unit.
Accessible components include: Blower
housing, blower motor, TXV, reversing valve,
and filter drier.
Figure 7 - Vertical Unit Service Access
Service access is provided through access
panels to the controls and compressor
compartment, an additional removable panel
to the compressor compartment, and a hinged
door to the blower section accessible through
the controls compartment.
While leaving the access panel opened is
acceptable for most service / maintenance
conditions, occasionally it will be necessary
for the panel to be completely removed.
UNIT HANDLING
Incorrect lifting can cause damage to
the unit, injury or death. Lifting
equipment capacity must exceed unit
weight by an adequate safety factor.
Always test lift unit not more than 24
inches high to verify proper center of
gravity lift point.
WARNING
Summary of Contents for ProFit WV Series
Page 2: ......
Page 45: ...Literature Change History July 2022 First Version ...
Page 46: ......
Page 47: ......
