A&D UA-767S-W, Instruction Manual

Page: 10 / 268

English 8
Operation Mode
1. Normal Measurement
Press the
START
button. Blood pressure is measured and the data is stored
in memory. This device can store the last 60 measurements in memory.
2. Recalling the Data
When nothing is displayed, press and hold
the
START
button.
Release the button when displaying the
average data.
The data number and stored data are
automatically displayed in order from the last
measurement.
For details on recalling the data, Refer to
“Recalling the Memory Data”.
3. Deleting all Data Stored in Memory
When turning off the device, press and hold the
START
button until the " " is displayed.
Select " " to clear data.
Data is cleared when the mark blinks.
The device turns off automatically.
4. Measurement with the Desired Systolic Pressure
Refer to page 15 for measurement with the desired systolic pressure.
START
START
In standby,
press and hold the
button