6
Using the Monitor
Installing / Changing The Batteries
1. Remove the battery cover.
2. Remove the used batteries and insert new batteries
into the battery compartment as shown, taking care
that the polarities (
+
) and (
-
) are correct.
3. Replace the battery cover.
Use only R6P, LR6 or AA batteries.
CAUTION
Insert the batteries as shown in the battery compartment. If not, the device will
not work.
When (LOW BATTERY mark) blinks on the display, replace all batteries with
new ones. Do not mix old and new batteries.
It may shorten the battery life, or cause the device to malfunction.
(LOW BATTERY mark) does not appear when the batteries are drained.
Battery life varies with the ambient temperature and may be shorter at low
temperatures.
Use the specified batteries only. The batteries provided with the device are for
testing monitor performance and may have a limited life.
Remove the batteries if the device is not to be used for a long time.
The batteries may leak and cause a malfunction.
The stored data are cleared when the batteries are removed.
When the AC adapter is used for measurement, memories are cleared
after pulling out the AC adapter.
Connecting The Air Hose
Insert
the
air
connector plug
into the air socket firmly.
Connecting The AC Adapter
Insert the AC adapter plug into the DC jack.
Then, insert the AC adapter into an electrical outlet.
The AC adapter, the model TB-233, is sold separately.
Note: When the AC adapter is pulled out,
the memories are cleared.
Air Socket
Air Connector Plug
Air Hose
AC adapter Plug
DC Jack
