14
Take measurements at the same time every day using the procedure described
in this manual to get to know your normal blood pressure. Regular readings give
a more comprehensive blood pressure history. Be sure to note date and time
when recording your blood pressure. Consult your doctor to interpret your blood
pressure data.
Troubleshooting
Problem Possible
Reason Recommended
Action
Batteries are drained.
Replace all batteries with new ones.
Nothing appears
on the display,
even when the
power is turned
on.
Battery terminals are not in
the correct position.
Reinstall the batteries with negative
and positive terminals matching
those indicated on the battery
compartment.
The cuff does not
inflate.
Battery voltage is too low.
(LOW BATTERY mark)
blinks. [ If the batteries are
drained completely, the
mark does not appear.]
Replace all batteries with new ones.
The cuff is not fastened
properly.
Fasten the cuff correctly.
You moved your arm or
body during the
measurement.
Make sure you remain very still and
quiet during the measurement.
The cuff position is not
correct.
Sit comfortably and still.
Raise your hand so that the cuff is
at the same level as your heart.
The device does
not measure.
Readings are too
high or too low.
If you have a very weak or irregular
heat beat, the device may have
difficulty in determining your blood
pressure.
The value is different from
that measured at a clinic or
doctor’s office.
Refer to “Why Measure Blood
Pressure At Home"
Other
Remove the batteries. Place them
back properly and try the
measurement again.
Note: If the actions described above do not solve the problem, contact the dealer.
Do not attempt to open or repair this product, as any attempt to do so will
make your warranty invalid.
