A&D SJ-15KWP, Instruction Manual

Page: 12 / 48

10
STABLE
NET
ZERO
STABLE
NET
ZERO
STABLE
NET
ZERO
STABLE
NET
ZERO
STABLE
NET
ZERO
STABLE
NET
ZERO
STABLE
NET
ZERO
7.
COUNTING MODE
Determines a unit weight (the weight of one piece) from a known sample quantity, and
calculates how many pieces are on the weighing pan using the unit weight.
The unit weight is maintained even if the power is turned OFF.
1.
Press the
MODE
switch to select "pcs".("pcs" = pieces)
2. Press the
SAMPLE
switch to enter the sample
unit weight storing mode. The numerical value on
the left indicates the number of samples.
3. Pressing the
SAMPLE
switch allows you to change
the number of samples in the order 5  10  20  50
 100  ESC  5.

By pressing the
MODE
switch when is
displayed, the scale exits the sample unit weight
storing mode to the count display.
4. When "
-
" appears at the right side of the number of
samples, press the switch to zero the scale.
If necessary, place a container on the weighing
pan, and press the
TARE
switch. Confirm that
the right side of the number of samples shows
zero.
5 Place the correct number of samples on the. weighing
pan or in the container.
6. Confirm that the STABLE indicator is turned on.
Press
the
MODE
switch to calculate and store
the unit weight. Remove the samples. The scale is
set to count objects with this unit weight.
 The total weight of samples should be more than
shown below, regardless of the number of samples.
SJ-3000WP/-BT: 2.5 g
SJ-6000WP/-BT: 5 g
SJ-15KWP/-BT: 12.5 g
SJ-30KWP/-BT: 25 g
If not, the display shows and returns to
the display of step 5. Increase the number of
samples (step 3) and try again.
7. Place the objects to be counted on the weighing pan.
Press
Samples
Press
Confirm
zero
Number of
samples
Weighing pan
Container
Press
Press
Press