13
4. DISPLAY SYMBOLS AND KEY OPERATION
Display symbols
Key operation
Key operation affects how the balance functions. The basic key operations are:
z
“Press and release the key immediately” or “Press the key”
z
“Press and hold the key”
= normal key operation during measurement
Key
When pressed
When pressed and held
Turns the display on and off. The standby indicator is displayed when the display is turned
off. The weighing mode is enabled when the display is turned on.
This key is available anytime. Pressing the key during operation will interrupt the operation
and turn the display off.
In the weighing mode, turns the
minimum weighing value on and off.
In the counting or percent mode, enters
the sample storing mode.
Enters the function table mode. Refer to “9.
FUNCTION TABLE”.
No function at the factory setting
Switches the weighing units when units other
than “g” are stored in the function setting.
Performs response adjustment and self check.
Performs
calibration of the balance using
the internal mass.
Displays calibration-related menu.
Stores the weighing data in memory or
outputs to a printer or personal computer
using the RS-232C interface (Factory
setting), depending on the function settings.
No function at the factory setting
By changing the function setting:
Outputs “Title block” and “End block” for GLP report.
Displays the data memory menu.
Sets the display to zero.
Weight data or
stored data
Units
Interval memory
standby indicator
Comparator indicators
Animal mode indicator
Response indicators (Weighing speed)
Displays the highest-order digit when placing a load of 1
kg or more on the MC-1000.
Displays data stored in memory.
Displays the weight data relative to the weighing capacity,
in percentage, in the weighing mode (Capacity indicator).
Processing indicator
Stabilization indicator
Standby indicator
Data number of the data
currently displayed
Processing indicator
Prior notice indicator
of automatic self
calibration
Interval memory
active indicator
点滅中
Blinking indicators
