![background image](http://html1.mh-extra.com/html/aandd/mc-2000/mc-2000_instruction-manual_3070955010.webp)
MC-2000, Version 2.6
I:MAN-MC2000USA
9
F7 – $1 Coin Addition
(Factory setting is “on”)
With “F7” on display, press
TOTAL
. Display shows “51 on”. Press
ROLLS
to turn off, (dis-
play then shows “51 off”), then press
Enter
to save.
F8 – Automatic Add to Totalizer
(Factory setting is “on”)
With “F8” on display, press
TOTAL
. Display shows “Ad on”. Press
ROLLS
to turn off, (dis-
play shows “Ad off”), then press
Enter
to save.
F9 – Automatic Coin Cup Tare
(Factory setting is “on”)
With “F9” on display, press
TOTAL
. Display shows “tA on”. The Factory setting adjusts for
the weight of the coin scoop provided with your MC-2000. To adjust for another container,
press
Enter
, display then shows “Zero”. Place empty coins scoop or cup to be used, then
press
ZERO
. Then press
Enter
to save.
To disable the tare entirely: when display shows “tA on”, press
ROLLS
,
(
display then shows
“tA off”), then press
Enter
to save.
F10 – Maximum Bill Prompt
(Factory setting is “on”)
With “F10” on display, press
TOTAL
. Display shows “40”. Selections are 40 / 50 / 60 / 80 /
100 / 150 / OFF / 20 / 30. Press
BILLS
to increase, press
TOTAL
to decrease. Press
Enter
to save.
RS-232C Connection
MC-2000 has an RS-232C output for connection to a printer or computer. A&D offers Model
AD-1191 Printer which comes equipped with time & date and interface cable. The RS-232C
data is factory set at 2400 baud, 7 data bits, even parity, 1 stop bit.
Pin No.
Pin Name
3
Transmit Data
Signal Level
RS-232
5
Signal Ground
RS-232
3
5
Front View
Pin assignments for the DSUB9 serial port connector