GX-A/GF-A Maintenance manual
Page 22
⑩
Secure the Counter weight.(Pan head
screw M3x40,1pc and Nut with spring
washer M3,1pc)
⑪
Remove the bolt for holding the beam
(1) and the spacer for positioning the
beam (1).
⑫
Secure the Magnet support by
pressing it against the base jig and
the roberval. (Allen head screw with
coned disk spring M5 x8, 60kgf
・
cm,
4pcs)
⑬
Secure the pan support arm (Short
head torx screw M4x10, 12kgf
・
cm,
3 pcs)
⑭
Remove from the base jig.
Counter weight
A bolt for holding
the beam(1)
A spacer for positioning
the beam(1)
Magnet support
Pan support arm
Summary of Contents for GX-A Series
Page 51: ......
