A&D GC Series, Instruction Manual

Page: 29 / 79

29
10.3. Call Up Unit Weight Together with Tare Weight
1. Set function setting to “ ” (refer to “ 14. Functions ”).
2. Refer to “ 8.2. Tare Subtraction ” to set the tare.
3. With the steps described in “ 10.1. Storing Unit Weight ”, unit weight and tare are stored together.
To additionally make an ID to which unit weight has already been registered store tare, call up the ID
in advance and perform step 2 and 3.
4. With the steps described in “ 9.6. Unit Weight by ID Number ”, unit weight and tare are called up together.
10.4. Call Up Unit Weight Together with Comparator Upper
Limit Value and Lower Limit Value
1. Set function setting to “ ” (refer to “ 14. Functions ”).
2. Refer to “ 12.3. Setting Upper Limits and Lower Limits ” to set upper limit value and lower limit values.
3. With the steps described in “ 10.1. Storing Unit Weight ”, unit weight, upper limit value, and lower limit value
are stored together.
4. With the steps described in “ 9.6. Unit Weight by ID Number ”, unit weight, upper limit value, and lower limit
value are called up together.
10.5. Call Up Unit Weight Together with Comparator Upper
Limit Value, Lower Limit Value, and Tare Weight
1. Set function setting to “ ” (refer to “ 14. Functions ”).
2. Refer to “ 8.2. Tare Subtraction ” to set tare.
3. Refer to “ 12.3. Setting Upper Limits and Lower Limits ” to set upper limit value and lower limit values.
4. With the steps described in “ 10.1. Storing Unit Weight ”, unit weight, upper limit value, and lower limit value
are stored together.
5. With the steps described in “ 9.6. Unit Weight by ID Number ”, unit weight, upper limit value, lower limit value,
and tare are called up together.