37
14.
Functions
The functions confirms or change the items that specify scale operations. Each setting value is stored
even after the power is turned off.
14.1.
Function Setting
1. Press the ON/OFF key to turn off the display.
2. Hold down the ZERO key and press the ON/OFF key.
When the software version
xxx is shown, release the
keys.
3. Press the ENTER key.
On the right side of the weight display, a simplified guide is
shown. If there are more items, press either the PRINT key
or the TOTAL key to switch the display.
4. Enter the appropriate number with the keyboard to
change/confirm the function setting.
For example, press the 5 key to go to the setting related
to comparator function.
Function setting
X: Comparator function
5. Press the ENTER key.
The function setting number is shown in the count display, and
the setting value is shown in the weight display.
- To change the setting
: To step 6
- To check the setting
: To step 7
6. Use the numeric keys 0 to 9 to change the setting value.
To correct the value, press the C key to re-enter it.
To finish without storing the value entered, press the
ON/OFF key. Press the ENTER key to store the value.
7. Press the ENTER key to store the setting value and go on
to the next item.
8. After changing/checking the necessary setting, press the
ON/OFF key to turn off the display, and then turn it on
again. The new setting is enabled.
Hold down the
key
and press the
key
