9
Front Panel
Remote scale mark.
Mark is displayed when a remote scale is used.
M
+
mark.
Mark is displayed when count data has been accumulated.
PRINT key.
Data is output.
TOTAL key.
The total count is displayed.
M
+
key.
The count data is added to the total.
Comparator results.
REMOTE SCALE key.
The key switches between the GC and remote scale
Unit weight is light.
The unit weight is too light for accurate counting.
key
Item code is displayed. Or the
M
-
key.
ACAI mark
(Automatic Counting Accuracy Improvement).
Mark is displayed when weight is within
the range of ACAI. Mark blinks during
additional ACAI processing and then
disappears.
RESET key.
Any previous operation is cleared.
0 to 9 , key.
Alphanumeric keys, decimal point
Stable mark.
Mark is displayed when the weighing
value is stable.
Net mark.
Mark is displayed when tare weight is
subtracted from gross weight.
C key.
The value input by numeric keys is
cleared.
Zero mark.
Mark is displayed when the weighing
value is at the zero point.
Unit weight display.
ENTER key.
Sample weight, ID and alphanumeric
input values are entered.
Mass display
STORE UNIT WEIGHT key.
Store unit weight, item code and
other data in memory.
ZERO key.
The zero point for the scale is set.
COMP key.
Upper limit value and lower limit
value are displayed.
ON/OFF key.
The display is turned on or off.
SAMPLE key.
Unit weight using samples is entered.
KEYBOARD TARE key.
A known tare weight using the numeric keys is input.
Count display.
TARE key.
Net value that subtracts the tare weight from gross weight is displayed.
ID. key.
Unit weight and other data from memory are recalled.
KEY BOARD key.
Unit weight using numeric keys is entered.
