A&D Doctor Pro TM-2430-13 Instruction Manual Download Page 8

Page: 8 / 69

Step 1

Connect the monitor to the processor.

Step 2

Connect the male end of the A&D-supplied RS-232C communication cable to the
processor.

Step 3

Connect the female end of the A&D-supplied RS-232C communication cable to the

computer.

Step 4

The display on the processor will show “0-----”. If the processor does not have a

display, the LED should be green. If the LED is not green or the “0-----” does not

appear, see “

3-2 Communication Errors

”.

If the processor shows “0-----”, go to step

5. If the processor has a green light, go to step 6.

Note

: If possible, keep the cable connected to the computer unless the port is needed

for other functions.

Step 5

Press the ENTER key on the processor keypad. A series of 6 dashes “------” will

appear on the processor screen.

Step 6

Run the software.

Step 7

Confirm that the correct serial port is set. For details, see “

2-9-4-2 Serial Port

”.

2-2-2 Connecting the TM-2430 series to the computer

♦

You must use the A&D-supplied RS-232C communication cable, otherwise

communication errors will occur.

♦

You must use AX-KO1502 cable for 9 pin serial port (supplied) or AX-KO1503 cable for

25 pin serial port (available separately as an option).

Figure 2 : Connection between the TM-2430 series and the computer

(The illustration above is not to scale.)

Step 1

Connect the male end of the A&D-supplied RS-232C communication cable to the

monitor.

Step 2

Connect the female end of the A&D-supplied RS-232C communication cable to the

computer.

Summary of Contents for Doctor Pro TM-2430-13






































































Search results

Summary of Contents for Doctor Pro TM-2430-13

Reviews:

Related manuals for Doctor Pro TM-2430-13

Brands by name

Popular brands

A&D Doctor Pro TM-2430-13, Instruction Manual

Search results

Summary of Contents for Doctor Pro TM-2430-13

Reviews:

Related manuals for Doctor Pro TM-2430-13

Brands by name

Popular brands