![background image](http://html.mh-extra.com/html/aandd/doctor-pro-3-tm-9501/doctor-pro-3-tm-9501_instruction-manual_446565022.webp)
10
4-2
Connecting the Blood Pressure Monitor to a PC
Connect the blood pressure monitor to your personal computer.
When the blood pressure monitor is connected to a personal computer, do
not place the cuff on a patient.
Only a personal computer that complies with the safety requirements of
IEC60950 can be used with this product. If a computer that does not
comply with those requirements is used, safety will not be guaranteed.
4-2-1 Connecting the TM-2430 to the computer
Use the USB cable supplied with the software, otherwise communication errors will occur.
Connection between the TM-2430 and the computer
(The illustration above is not to scale.)
Connect the blood pressure monitor to a personal computer as follows.
1. Insert the male end (mini-pin jack) of the USB cable into the monitor.
2. Insert the male end (USB A plug) of the USB cable into the computer’s USB port.
Note
: Keep the cable connected to the computer unless the port is needed for other
functions.
3. Start up Doctor Pro3.
TM-2430
Mini-pin jack
USB A plug
USB cable
Personal computer