15
6-3
Selecting or Adding a Patient
Saves the measurement data received. For details, refer to Section 9 “RECEIVING DATA.”
1. Select from the list of registered patients the patient under whose name you would like to
save data.
To select a new patient, click [New patient] to register a new patient.
When the patient selection is completed, click [Next].
2. Confirm the patient to be registered. Click [Register] and then click [OK] in the Confirm
window.
3. When the display shown below appears, the patient has been registered.
To complete the operation, click [Close].
To continue receiving data, click [Next data].
Select a patient.
To select a new patient, register a new
patient.
Click [Next].
Confirm the patient to be registered
.
Click [Register].
“Saved” appears.