6. How To Operate
6.1. Bluetooth Paring
CAUTION
To start communication, pairing between the product and the measuring instrument is necessary.
□
□
□
One compatible weighing unit can be connected to one unit of this product.
□
□
□
When pairing, turn off the power supply of devices othre than the measuring instrument to be paired.
1. Turn on the measuring instrument to be paired.
2. Press the ON/OFF key of this product to turn on the power.
3. After all the segments turn on,
-------
is displayed.
4. Press and hold SET key (for approximately 3 seconds)
until the BT indicator (upper right of the display) starts flashing.
5. The BT indicator flashes, and pairing starts.
6. When pairing is completed, the BT indicator lights up.
If the measuring device is not found (if the BT indicator does not light up),
the power turned off after about 1 minute. Repeat from step 1.
7. The product is connected to the measuring device.
If the measuring device's power is disconnected or the connection is lost for some reason,
the BT indicator turns off.
8. The received measurement data is displayed. (Refer to
"6.2. Display"
)
□
□
□
If the BT indicator does not light up, turn off the power of the product and the measuring device
once, and then repeat the above procedure again.
□
□
□
After pairing, the paired measuring device is detected and automatically connected, it is not
necessary to perform the connection operation each time.
□
□
□
In the following cases, perform pairing again.
・
When connection to the measuring device becomes impossible.
・
You do not know what device the product is paired with.
・
To communicate with another measuring device.
SET
Press and hold (Approx. 3 seconds)
Blinking BT indicator
ON/OFF
BT indicator turn on
(Connected status)