background image

 

 

 

This Manual and Marks 

 

All safety messages are identified by the following, "WARNING" or "CAUTION", of ANSI Z535.4 (American 
National Standard Institute: Product Safety Signs and Labels). The meanings are as follows: 

 

      WARNING 

A potentially hazardous situation which, if not 
avoided, could result in death or serious injury. 

      CAUTION 

A potentially hazardous situation which, if not 
avoided, may result in minor or moderate injury. 

 
 
                This is a hazard alert mark. 
 
 
©2019 A&D Company Ltd. All rights reserved. 
No part of this publication may be reproduced, transmitted, transcribed, or translated into any language in any 
form by any means without the written permission of A&D Company Ltd. 
 
 
The contents of this manual and the specifications of the instrument covered by this manual are subject to 
change for improvement without notice. 
 
 
The Bluetooth    word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of 
such marks by A&D is under license. 
 
 
 

WARNING 

Repairs 

Do not disassemble the device. Contact your local A&D dealer if your device needs service or repair. 

 

Troubleshooting 

If a problem has occurred and you cannot clear it, stop using the device, place a notice on the device and 
request service from the store where you purchased the device or from your local A&D dealer. 

 

CAUTION 

 
Conditions for use and Ambient Temperature 

 

The device is a precision instrument. Avoid installing the device in direct sunlight, excessive dust, high 

humidity, high temperature, large temperature fluctuations or magnetic fields, which may cause problems 
or malfunctions. 

 

Use the device range of the -10°C to 40°C, with less than 85% R.H. 

 

Operation 

 

Avoid mechanical shock to the device. That could cause damage. 

 

The device is not waterproof type. Water invading into the device may cause damage. 

 

If the device is not to be used for a long period of time, remove all batteries from the battery compartment 

to avoid battery leakage. 

 

Do not mix batteries made by different manufactures, or mix old and new batteries. 

Replace all of the batteries at one time. 

 
 

Summary of Contents for AD-8931













Reviews: