6.2. Display
Set the data output mode of the measuring instrument to stream mode.
□
□
□
Refer to the operation instruction manual of the measuring device for how to change the data
output mode of the measuring instrument.
1. Turn on the paired measuring device
If pairing has not been performed, perform pairing. (Refer to
"6.1 Bluetooth Pairing"
)
2. Press the ON/OFF key of this product to turn on the power.
3. After all the segments turn on,
-------
is displayed.
If the device paired with is not found,
the power turns off after approximately 1 minute.
4. Confirm that the BT indicator (upper right of the display) lights up.
If the BT indicator does not light up, turn off the product and the
measuring instrument and turn them on again.
5. Displays the received measurement data.
If the measuring device's power is disconnected or the
connection is lost for some reason,
-------
is
displayed, and the BT indicator turns off.
□
□
□
If the measurement data is not received,
-------
is displayed.
□
□
□
If the display does not change from
-------
while the connection mark is lit,
check that the data output mode of the measuring instrument is stream mode.
□
□
□
When the measurement range is exceeded,
e
or
-e
is displayed.
□
□
□
When the auto power-off function is activated when operating by batteries, the power turns off when
the stable indicator is on and no operation is performed for approximately 5 minutes.
(Refer to
"7. Function"
)
BT indicator turn on
(Connected status)
ON/OFF
