2
1
INTRODUCTION
The AD-8922 is a remote controller. Read this manual completely before using the AD-8922 in order to
ensure a sufficient understanding for proper use.
1
-
1
Outline
The AD-8922 is connected to an A&D manufactured weighing instrument, using the RS-232C serial interface.
z
Displays the weighing data transmitted by the weighing instrument.
z
Key operations remotely control the weighing instrument.
(Entering the function setting mode of the weighing instrument or calibration using an external weight
is not available. Available operations depend on the weighing instrument used. See Table 2 in "1-2
Applicable Instruments".)
z
The data the AD-8922 receives can be output, using the RS-232C serial interface. So, external
devices such as a personal computer or a printer can be connected to the AD-8922.
z
Can be panel-mounted.
z
Various options such as BCD output, comparator output, current loop input and analog output are
available. For details, refer to "9 OPTIONS" and the following relevant chapters.
1
-
2
Applicable Instruments
Applicable weighing instruments and what is required are shown in the table below.
Table 1 Applicable weighing instruments and what is required
What is required to connect to
a weighing instrument
Cable required to connect to
an external device such as
Weighing
instrument
Option for the
instrument
Communications cable
(Length 2 m)
Personal
computer
AD-8121B
compact printer
GX, GF, GX-K,
GF-K, GP, FP,
AD-4212, GR, HR
None
(D-Sub 25-pin)
AX-KO1710-200
EK-
i
, EW-
i
, FC-
i
,
FC-S
i
, GH, HR-
i
None
(D-Sub 9-pin)
AX-KO2466-200
EK-G, EK-H,
ET-W, EW-G
OP-03
(D-Sub 25-pin)
AX-KO1710-200
HV-G, HV-WP,
HW-G, HW-WP
None
(DIN 7-pin)
AX-KO1786-200
FG
OP-03
(DIN 7-pin)
AX-KO1786-200
FS, FS-KL
OP-03
(DIN 8-pin)
AX-KO1786-200
FG-L, FG-M
OP-23
(DIN 8-pin)
AX-KO1786-200
AX-KO1786-200 AX-KO462-200
Note:
The standard communications cable is AX-KO1710-200. A substitute
communications cable may be provided as specified when ordering the AD-8922.